 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STM8057 SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Designer's Data Sheet FEATURES: * Available Voltages from 96V to 1600V. Consult Factory. * Meets all Environmental Requirements of Mil-PRF-19500 * Custom Configurations Available * Reverse Polarity Available (Add Suffix "R") * 150oC Maximum Operating and Storage Temperature * TX and TXV Level Screening Available APPLICATIONS: * Voltage Sensitive Components Protection * Protection Against High Power Surges * Lightning Protection 120 kWATTS 840 VOLTS UNIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR Maximum Ratings Peak Pulse Power Dissipation Stand off Voltage Breakdown Voltage (Minimum) Clamping Voltage at IPP 2/ Peak Current Operating and Storage Temperature 2/ SYMBOL PD VRWM VBR VCC IPP Top, Tstg VALUE 120 800 840 1,000 120 -65 to +150 UNITS kW V W V A o C NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: TVS002A STM8057 SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Electrical Characteristics Reverse Leakage Current (VWM = 800V, TA = 25oC, 300 sec pulse minimum) Reverse Leakage Current (VWM = 800V, TA = 0oC, 300 sec pulse minimum) Breakdown Voltage (IBR = 15mA, TA = 25oC, 300 sec pulse minimum) Breakdown Voltage (IBR = 15mA, TA = 0oC, 300 sec pulse minimum) Clamping Voltage (IPP = 120A(pk), tR = 10sec, tP = 1000sec) Package Outline: SYMBOL IR1 IR2 VBR1 VBR2 VC MIN 840 810 - MAX 100 200 1000 UNITS VDC VDC V(pk) Note: This Surface to be Flush to +.005" underflush with Plane -A-. 100 90 80 70 60 50 40 30 20 10 0 0 tp 1 2 3 4 TIME (ms) Notes: 1. All voltages are measured with automated test set using 35 msec test time. Longer or shorter test times will have a corresponding effect on the measured value due to the heating effects. 2. Current Pulse rises to peak value of IPP in 10sec and decay to half value, IPP/2, in 1msec. 3. Pulse width (tP) is defined as the time from peak pulse current IPP to the point where peak pulse current decayed to 50% of rated IPP. (10sec x 100sec wave form as defined by R.E.A.) % PEAK VALUE |
Price & Availability of STM8057
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |